Firmware Upgrading

Follow below steps to deliver settings to the device.

Before you start, make sure that your phone's Bluetooth is enabled and the App is allowed to use Bluetooth. If you plan to do the upgrade at places where the network connection is not available, you must download the firmware in advance using firmware management feature.

Steps

1. Log in to your account and tap the INTELINK icon at the bottom center.
   The App starts scanning for nearby devices. Devices detected by INTELINK are highlighted in the device list, while undetected devices are gray.

2. Tap on a device, then tap Firmware upgrade.

   If you want to upgrade multiple devices, long press the device to enable multi-select mode, then select the devices you want to upgrade. Tap Next to proceed.

3. Select one option from the list.
   There are three options provided to select the firmware.

   • Automatic
     Automatically select the latest firmware to upgrade your device. To avoid upgrade failure or device malfunction caused by the incorrect firmware, it is strongly recommended that you choose Automatic to upgrade the firmware.

   • Manual
     Select the firmware manually from a list of available firmwares. This option is not available when multiple devices are selected.

   • Local
     Select the firmware from the local storage of your mobile. You must download the firmware first.

The App will connect to the devices one by one to upgrade the firmware.